n','url':'https://www.youtube.com/watch?v=zuqo0p3xMx8&t=2s','width':854,'height':480,'providerName':'YouTube','thumbnailUrl':'https://i.ytimg.com/vi/zuqo0p3xMx8/hqdefault.jpg','resolvedBy':'youtube'}'>

In today’s article, you’re going to see how to build and set up live auto tune for worship.

By default, Auto-Tune is set to the chromatic scale, all the piano keys, starting on C. To Auto-Tune yourself in C major, you need to remove C-sharp, D-sharp, F-sharp, G-sharp and A-sharp. (There are no flats for some reason.) This is a lot like the way you set up a xylophone or marimba for a beginner. Auto-Tune’s default is to correct pitches to a chromatic scale. This pitch correction is not as noticeable and can still leave room for notes that sound “off.” In this example, the song is in C Major so we would set the Key/Scale menu to C Major.

Auto-Tune Pro, Auto-Tune Artist, Auto-Tune EFX+, Auto-Tune Access, Harmony Engine, Mic Mod and more. SOS Forum Post Editor In Chief Paul White replies: Auto-Tune is designed to address the problem of vocal pitching imperfections, though I've also used it successfully on other instruments, including electric guitar solos and fretless basses.
Another option is to set the Scale parameter to Chromatic, which will cause Auto-Tune Artist to always tune to the closest pitch in the 12-tone chromatic scale. C l a s s i c M o d e Classic Mode is the long-awaited return of the classic “Auto-Tune 5 sound.”.
Another option is to set the Scale parameter to Chromatic, which will cause Auto-Tune Artist to always tune to the closest pitch in the 12-tone chromatic scale. C l a s s i c M o d e Classic Mode is the long-awaited return of the classic “Auto-Tune 5 sound.”.

We’ll be covering:

Uses and purpose of auto tune in worship
Gear required for auto tune
Setting up auto tuning
Testing the signal flow

Before we jump in, don’t forget to check out and download our Worship Ministry Toolkit. This will provide you with a list of all the gear we talk about so it will help you follow along.

Uses and Purpose of Auto Tune in Worship

We know that auto-tune can be a divisive issue, but here are a couple things to keep in mind:

Auto-tune should never be used to compensate for poor singing

Auto-tune is not, and should not be used to ‘make up’ for wildly incorrect pitches, it is only there to give that extra push if necessary. We’re all for excellence in worship, and we encourage our band to practice and be the best that they can. Auto-tune is just a tech-savvy way of eliminating small mistakes or distractions.

Auto-tune works best with great singers

It can ‘tune’ them up to make dense, difficult harmonies that much better. Not everyone sings perfectly on pitch all the time and auto-tune is able to take those small inconsistencies and correct them in a natural, non-artificial sounding way. A part of gospel-centered worship is crafting the best ministry we can and we believe that auto-tune has a place in that vision.

Gear Required for Auto-Tune

I’m going to give you a brief overview of the gear you’ll need to set up auto-tune. I’ll go more in-depth in the next section, but the Ultimate Guide to Worship Tech 3-pt. Series will be helpful if you don’t already have some of this gear.

Digital Mixing Console

You’ll need a console that is comparable to the Midas X32 or M32. We use the M32R at our church, but you can use your preferred console so long as it can do the following:

Can connect to computer via USB or Dante
Has multiple inputs and outputs
Can send raw audio data to the computer and then receive it back once it’s tuned

Pretty much any modern digital mixing console can do this, but just be aware so you don’t spend money on the wrong gear.
Dante Expansion Card

Now, this is not necessary, but it is extremely helpful for getting your auto-tune up and running. Dante helps you manage your inputs and outputs in a really straightforward way, making it easy for setup. You don’t need to use it, and can do just fine via regular USB connection, but we do think it makes managing your signal flow a lot easier.

Here’s a brief overview of our signal path:

Signals from the three vocalists come from the sound console via Dante, to Ableton
Signals get tuned and sent back to the sound console
The sound console sends those signals and the tuned vocals come out of the PA

By utilizing the Dante network, all our gear can talk to each other and create the flow that you need. We put our auto tuning in Ableton, but on a computer that’s completely separate from our slides, clicks, tracks, etc. Because we have Dante, the computers can talk to each other and the mixing console so that they all work together and keep our signal paths uncluttered.

Auto Tune Plug-Ins

The two most popular tuning plug-ins are Auto-Tune and Waves Tune by Waves. We recommend Waves because it does everything Auto-Tune does but for a fraction of the price. Install the Waves Plug-In into Ableton and you’ll have vocal tuning up in no time.

Auto Tune Chromatic Settings

Setting Up Auto Tuning

Now that we’ve gone through all of the gear, we’ll walk you through how to set up auto-tuning for one vocal mic.

Building in a Safety Net

This step isn’t necessary, but is a good practice just in case anything goes wrong. What we do is create two channels, one for the raw vocals and one for the tuned vocals. This is so if anything goes wrong with Ableton, the sound engineer can easily mute the tuned vocals and turn up the raw signal. Again, it’s not necessary but might be good to keep in mind when building your setup.

So here’s how we set up those channels:

Raw signal from our stage box goes into our sound console (we also use this for the in-ear monitoring because it’s not good to monitor your tuned sound)
The second, tuned signal is coming from the back of the board into Ableton where it’s tuned
It’s then fed back into the console and goes out to the PA system

Routing Overview

Routing the signal to the stage box:

Mic takes the sound and it goes to the XLR cable and into the stage box
The stage box then goes to the back of the mixing console

Sending Audio to Ableton

Since we’re using Dante, we send the signal from the mixing console through the Dante network
The network picks up the signal and goes into the Dante Sound Card and into Ableton Live
This gives you the ability to see and modify all of your channels with ease

Sending Signal Back to the Console

You’ll be able to see the Dante Sound Card plug-in in Ableton
It will give you access to all of the inputs/outputs, and you can modify which channels you want
Once you’ve done that in the preferences, the signals will go back through the Dante Network and into the console

Configuring Your Auto Tuning Preferences

Now that you’ve made sure all of your channels and routing are correct, you’re ready to dive into Waves.

Go into the Ableton Plug-Ins tab and drag Waves down into the screen
Once it’s open, hit the ‘wrench’ icon to open up your settings
Now you can modify your pitch correction for your desired effects

Once your in the settings, you can play with everything from the tuning mode to the speed of the note transition. You can set them to anything you want, but we’ve found that the default settings already sound pretty natural. Any further tinkering is all to need or taste.

We’ve kept ours in the chromatic mode, which will correct the pitch to the closest chromatic note. We have competent singers so 99.99% of the time, the tuning corrects a slightly sharp or flat note to the desired pitch.

Testing the Signal Flow

Before you start using auto-tuning in your services, you’ll want to test it first.

Go back into Dante and make sure all of your channels, inputs, and outputs are correct. You should be able to see your in